Community
450 Views, 2 Replies
i did a cloister vault in the massing environmentas per @constantin.stroescu video and loaded it into the project. When i tried to make roof with tow options 1. Wall by face and 2. Roof by face. In both the attempts i didn't get the expected result.
1. Wall by face
when i used wall instead of roof, i get this unjoint corners as in the image.
2. Roof by face
When i use roof by face option i get some extra extensions which i marked with the red lines in the image. When i tried to get rid of that extra extensions with the shaft opening tool it didn't help.
so can some one please help me to sort this out...
1. Wall by face
when i used wall instead of roof, i get this unjoint corners as in the image.
- you can choose how to place Wall by Face from: Properties >Constraint > Location Line
2. Roof by face
When i use roof by face option i get some extra extensions which i marked with the red lines in the image. When i tried to get rid of that extra extensions with the shaft opening tool it didn't help.
- you can control the rim appearance from Properties > Construction>Rafter Cut settings
https://knowledge.autodesk.com/community/screencast/bda4e55e-6cf6-49c0-a3d8-b7c6cc61928e
Constantin Stroescu
Forums Links
Can't find what you're looking for? Ask the community or share your knowledge.
Post to forums
