Can't select window in plan

[tmccar]

 I have placed 2 windows in a house model - one is on the ground floor and one on a basement wall.

I can select the one in the ground floor plan, but not the one on the basement plan. Why would this one be unselect able?

[RDAOU]

@tmccar 

• Check if it is in a design option
• Check the Select options ... and verify that condition of the window is checked. ie: if window is pinned, select pinned should be checked

   OR   

Share something to lessen the guesses

[jvpantin2]

Another possibility is that Select underlay elements is disable, must be unmarked in order to take elements below view range. Look at screen's right-down corner:

[barthbradley]

Is the window PINNED and you have Select Pinned Elements unchecked?  

[tmccar · Accepted solution]

I should have looked at the side elevation - because of the height of the window,  it was breaking into the next floor.