Re: Beam system align to edge of support instead of centerline

Anonymous · ‎04-26-2016

Is it possible to have a beam system in which the beam handles align with the edge of the support member instead of the centerline? I want to be able to change the angle of the support and still have all the beams connect to the top left edge of the structural box (see image below). I can't just change the justification line of the box to left because I will need to add another beam system on the other side of the box that would need to have a right justification.

ennujozlagam · ‎04-26-2016

hello, you may try to check it here previous thread. thanks

Click Here

Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

Anonymous · ‎05-02-2016

This isn't exaclty what I am looking for. My problem is that when I create the beam system using pick supports, it automatically aligns to the center line of the supports. Since my center support is 10 ft wide, I need the beam system to align to the face of the support instead of the centerline.