Announcements

Starting in December, we will archive content from the community that is 10 years and older. This FAQ provides more information.

Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Asymmetrical corner window

8 REPLIES 8
SOLVED
Reply
Message 1 of 9
lorena_dantas
901 Views, 8 Replies

Asymmetrical corner window

I have a problem with a different sill height corner window. The second fixed panel does't cut the wall despite the fact I've modelled a void form.

 

I can not cut the host with the same void because the sill heights between panels are different.

Do you have any suggestion to fix this issue?

 

Thanks!

Labels (2)
8 REPLIES 8
Message 2 of 9

It's not difficult if you model this with 2 elements, instead of trying to make it with one.


Alfredo Medina _________________________________________________________________ ______
Licensed Architect (Florida) | Freelance Instructor | Profile on Linkedin
Message 3 of 9
ToanDN
in reply to: lorena_dantas

To cut two walls with one window, do not cut the host wall with the void in the family. Instead, set the family to cut with void when loaded and use Cut geometry to manually cut the two walls with the window in the project.

Message 4 of 9
syman2000
in reply to: lorena_dantas

Have you look at sample from Revitcity? The window family itself use large void so it will cut into the perpendicular wall. Use that logic and see if this works with your family.

 

syman2000_0-1697739319709.png

 

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx
Message 5 of 9

I can not use the same void because they've different sill height.

Message 6 of 9
anze.kumar
in reply to: lorena_dantas

Try making two Voids in the family, each one with different Sill Height. Then use the principle from Toan.. Cut when loaded.

 

anzekumar_0-1697783728528.png

 

Message 7 of 9

I'm doing that but it doesn't works...

Message 8 of 9
anze.kumar
in reply to: lorena_dantas

Did you try adjusting the Void inside the interior

 

anzekumar_0-1697785490701.png


Also, maybe try disjoining these two walls if there is any change.

anzekumar_1-1697785587290.png

 

Message 9 of 9
lorena_dantas
in reply to: anze.kumar

I don't know how but I got it to work! 😎

Thanks four your comments !😉

 

 

lorena_dantas_0-1697788622904.png

 

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report