Allign curtain wall to roof

[Anonymous]

Goodmorning, 

when I alling the wall to roof the two walls disalling. 

What is the reason?

How can I fix the problem?

. rvt attached.

Thank's

[Alan.johnson1970 · Accepted solution]

Im not 100% sure what you mean, but if it is aligning the curtain wall panels,

just unpin them and use align. Align them as required.

[RDAOU · Accepted solution]

@Anonymous 

The way you set the curtain wall up is using "Maximum Distance" (0.755m) for the horizontal Mullions...in such case Revit will calculate automatically the offsets of the horizontal Grid line to fit in between the bottom and top constraints of the wall without exceeding 0.755m … considering the slanted roof on one side, the offsets on Wall 1 are different than those on wall 2 => misaligned

If you want them to align, use "Fixed Distance" =0.755 ...see below (click to enlarge)

[Anonymous]

@RDAOU  to have the roof"align" to roof I can only modifiìy perimeter as in pic 1?

With "attached top/base" say me "can't keep wall and target joint.

[ToanDN]

Do one or another. You either attach the base to floor and top to the roof, or detach all and edit profile.

[Anonymous]

@ToanDN  I ask the question in an other post

[ToanDN]

So your post 4 is just a statement and not a question?

[Anonymous]

@ToanDN  I'm wrong. i cancelled it now. 

[Anonymous]

@ToanDN I write a new post for message 4.