Algorithm for constructing an ellipse embedded in a rectangle Revit Archi 2019

[dedperded2025]

Подскажите пошаговый алгоритм построения эллипса встроенного в прямоугольник размером 105,6см х 39,6см в Ревит с помощью стандартных линий и окружностей.  Tell me please a step-by-step algorithm for constructing an ellipse embedded in a rectangle of 105.6 cm x 39.6 cm in Revit using standard lines and circles.

[bill_gilliss]

This method will approximate an ellipse with arc segments, using a true arc as a guide, and is much faster than any method that requires geometric construction. The first arc segment is created using the Start-End-Radius Arc tool, and all the rest are with the Tangent End Arc tool. Easy.

64d86b08-45c9-4cbe-8eb8-18ced25d7d81,640,620

[Alfredo_Medina]

Just curious, why you don't want to use the Ellipse tool to draw an ellipse?

[bill_gilliss]

See if I can get the screencast to work this time:

[bill_gilliss]

One more time. (It took a while for the Autodesk servers to get this ready.)

64d86b08-45c9-4cbe-8eb8-18ced25d7d81,640,620

[dedperded2025]

In particular, I am building an architectural wall based on an ellipse. But the drawing tools on the walls don't have it.

[ToanDN]

Create an elliptical  mass form and generate the wall by face.

[constantin.stroescu]

I'll complete that because the dimensions of the ellipse are so small you have to place Wall by Face > Finish Face Interior...

[bill_gilliss]

I'm TRYING to get screencasts to work. Here it is as an Mp4.