Robot plugin development

Robot plugin development

liam.carr59V7G
Enthusiast Enthusiast
1,308 Views
8 Replies
Message 1 of 9

Robot plugin development

liam.carr59V7G
Enthusiast
Enthusiast

Are any Autodesk employees in this forum able to clarify if PM robot is being developed and are there any updates or improvements in the pipeline?

0 Likes
1,309 Views
8 Replies
Replies (8)
Message 2 of 9

lokesh.kalia
Autodesk
Autodesk

Hello @liam.carr59V7G  The PowerMill Robot plugin is not being actively developed.



Lokesh Kalia
Senior Manager, Software Development
0 Likes
Message 3 of 9

istan
Advisor
Advisor

We usually take just the paths + tcp orientation from PM and postprocess them in a different software. PM is missing too many features they will never have - esp. for additive manufacturing. PM was simply not developed for such a process. Imagine you have a 10-DOF machine..

0 Likes
Message 4 of 9

liam.carr59V7G
Enthusiast
Enthusiast

It’s a shame, I have been using it for about 7 years now across my Kuka robot and also with my 5 axis twin table router and 3 axis router. Along with using power shape, fusion and Netfab. I think this will be my last renewal. Maybe I’ll stick with fusion and try and move the 3 axis work over to that and possibly the 5 axis stuff as well if it possible.

 

I think I’ll start looking at sprutcam and mastercam/robotmaster for the Kuka.

0 Likes
Message 5 of 9

istan
Advisor
Advisor

Honestly, from your list I would only identify robotmaster as useful for robots. Even if you go with Siemens NX, you would have 2-3 different products in combination for additive. Just a small change for a certain detail on the part of e.g. the tool angle or a processparameter escalates. Also a simple task like 'holding the part up', can be a challenge when reaching speed limits..

0 Likes
Message 6 of 9

liam.carr59V7G
Enthusiast
Enthusiast

My Kuka is used for milling operations so additive type programming is high on my agenda. Really i want a package that can offer both OLP and simulation for my Kuka and for my 5 axis router and also something that is constantly improving and adding features. It feels like autodesk is using powermill as a cash cow and just developing fusion 360. 

0 Likes
Message 7 of 9

istan
Advisor
Advisor

I'm sure, sooner or later they have to replace all these old products by fusion360 or whatever else. Experienced C/C++ programmers retire and all that remains is software with pieced-together Pyhton code 😉

0 Likes
Message 8 of 9

greg9504
Participant
Participant

Have you found an alternative?  Fusion 360 has a post processor for ABB and Kuka robots, but there is no robot simulation, just generic 3axis tool path simulation.  I've used it for a few simple milling jobs.  You can see a tutorial on it here:

https://www.autodesk.com/autodesk-university/class/Learn-Rules-Then-Break-Them-Fusion-360-Industrial...

But without full simulation of the robot I'm not comfortable using it for anything complex so I'm looking for a solution.  Sprutcam has been replaced by Ency.  

0 Likes
Message 9 of 9

geir_hovland
Community Visitor
Community Visitor

Toolpaths (APT-CLS format or G-code) from PM can be imported into IRBCAM, which offers cost-efficient subscription-based plans on a monthly or yearly basis.

0 Likes