PowerMILL 2017 or 2018 Training

[hx]

Can Autodesk offer the PowerMILL 2017 or 2018 version training file.

Just like the PowerMILL 2016 Training.

I can find the PowerMILL 2016 training files in Delcam Partner Support.

https://partners.delcam.com/downloads/category.php?pgrp=PMILL&cat_id=78

But I can not find the Version 2017 or 2018.

[jitendra.chaudhari · Accepted solution]

Hi @hx,

Thank you for contacting Autodesk Community Forum.. 

We the latest training notes for Autodesk PowerMill, PowerShape, ArtCAM and FeatureCAM and are uploaded on Autodesk BOX. These can downloaded from from following link- 

https://autodesk.app.box.com/s/qfw8d9uhr0by7dm9gdebh9fk5lh3ixus 

For Autodesk 2018 Series Products - You can access the training material from Help loaded with 2018 installation itself.

Hope this helps, 

[Anonymous]

Can Autodesk offer the PowerMILL 2017 or 2018 version training file.

Just like the PowerMILL 2016 Training.

I can find the PowerMILL 2016 training files in Delcam Partner Support.

i am unable to locate partners delcam support?

could u show me

[Anonymous]

Many thanks Jitendra  !

Can you please also add PowerSHAPE Reverse Engeneering Training ?

Best regards.

[jitendra.chaudhari]

Hi @Anonymous,

Thank you for contacting Autodesk Community Forum..

I have uploaded the PowerShape Reverse Engineering Training Notes on following link-

https://autodesk.box.com/s/fvswm4wglrcsi5ah73v95tppauy2tyi6 

Thank you for your time and co-operation,

[Anonymous]

Thanks again Jitendra  !

Best regards.

[jitendra.chaudhari]

Hi @hx @Anonymous @Anonymous,

Thank you for contacting the Autodesk Community Forum.. 

Earlier supplied link for Training data is not working so formally informing the latest link for downloading the training material for PowerMill, PowerShape, ArtCAM, FeatureCAM 2017 

https://autodesk.box.com/s/qfw8d9uhr0by7dm9gdebh9fk5lh3ixus 

Thank you for your time and co-operation, 

[jitendra.chaudhari]

Hi @Anonymous,@hx, @Anonymous,

Thank you for contacting the Autodesk Community Forum.. 

Earlier supplied link for Training data is not working so formally informing the latest link for downloading the training material for PowerMill, PowerShape, ArtCAM, FeatureCAM 2017 

https://autodesk.box.com/s/qfw8d9uhr0by7dm9gdebh9fk5lh3ixus 

Thank you for your time and co-operation,

[Anonymous]

Hi Jitendra !

Links are worked - only need to copy them and paste.

And - can you please add training models for PowerSHAPE ?

you added some models, but some other models is absent.

Thanks.

Best regards.

[yaheya456]

Hi there Jitendra Chaudhari.

Links you've up loaded has expired , would you send some fresh links , so that i can download it ??

Thanks and regards.

[jitendra.chaudhari]

Hi @yaheya456,

Thank you for contacting Autodesk Community Forum.

It seems the issue with box.com for not opening link in new tab without coping actual link from post. I have requested Box.com support to look into this. Can you please copy link -

https://autodesk.box.com/s/qfw8d9uhr0by7dm9gdebh9fk5lh3ixus 

and paste into new tab in web browser as stated by @Anonymous. 

Thank you for your time and co-operation,

[yaheya456]

Hey jitendra.
Yup that works for me now , thanks a lot for your support !!!

Best regards.

[Meysam_Ghorbani]

hi

this link is empty!!

[jitendra.chaudhari]

Hi @Meysam_Ghorbani,

Thank you for contacting Autodesk Community Forum.

It seems the issue with box.com for not opening link in new tab without coping actual link from post. I have requested Box.com support to look into this. Can you please copy link -

https://autodesk.box.com/s/qfw8d9uhr0by7dm9gdebh9fk5lh3ixus 

and paste into new tab in web browser as stated by @entoged. 

Thank you for your time and co-operation,

[Anonymous]

Hi Jitendra Caudhari !

Can you please add Training Data (files, examples etc) for standart PowerSHAPE (not for Pro version).

It will be very usefull, i think.

And, if it possible - please also add ArtCAM Premium training course, PDF only.

Thanks and best regards.

[jitendra.chaudhari]

Hi @Anonymous,

Thank you for the contacting Autodesk Community Forum..

We combined data for training as uploaded on following link-

https://autodesk.box.com/s/f1be6ihwuakdsmyl63n4orgxv7htwzct 

We do not have separate set of data for PowerShape 2016. Can you please elaborate in details which data you are actually looking for? 

Regarding the ArtCAM Premium training notes, there are no pdf available for Premium version as of I know.  Still you can ask about this on ArtCAM forum. 

Thank you for your time and co-operation, 

[Anonymous]

The link doesn't works, fix it please.

[jitendra.chaudhari]

Hi @Anonymous,

Thank you for contacting Autodesk Community Forum.. 

The link works if you copy the link and paste into new web browser tab. Any way I am uploading the Training notes on new link with dropbox-

https://www.dropbox.com/s/qkk912zfiesci64/2017%20Training%20Notes.zip?dl=0   

Thank you for your time and co-operation,

[Anonymous]

sir

i want to learn powermill robot.

so from where i can get the trial version of it so i can start learning it..

thanks ,

kishan

[jitendra.chaudhari]

Hi @Anonymous, 

Thank you for contacting Autodesk Community Forum.. 

I have not enough knowledge for Trial versions but as I know PowerMill Ultimate Trial version allows users for offline Robot Programming. Please refer the following link for further details- 

https://www.autodesk.com/products/powermill/free-trial 

If you still have the further queries on robot training, can you please contact local Autodesk Office or visit Autodesk Customer Service or Technical Support.

Hope this helps.. 

Thank you for your time and co-operation,