Solved: Thermal expansion tutorial

arun_gopala · ‎03-23-2022

Can anyone share the tutorial for thermal expansion. Basically I have a geometry as shown in below image (red profile).The geometry can be surface (2D) or solid (3D).I am very new to Autodesk In-cad Nastran. If any one have a tutorial which shows the similar analysis ,Please share it. Very much appreciate your help. Thanks

John_Holtz · ‎03-24-2022

Hi @arun_gopala Welcome to Inventor Nastran.

This article should help with your analysis. See How to perform a thermal expansion/ thermal stress in Inventor Nastran | Inventor Nastran | Autodesk....

Let us know if you have any questions.

John

John Holtz, P.E.
Global Product Support
Autodesk, Inc.

If not provided already, be sure to indicate the version of Inventor Nastran you are using!

"The knowledge you seek is at knowledge.autodesk.com" - Confucius 😉

arun_gopala · ‎03-24-2022

Hello John,
Thanks for the information. Do you by chance have any tutorial with example?

John_Holtz · ‎03-25-2022

See this tutorial: Autodesk Inventor Nastran 2022 Help | Tutorial B6: Heat Transfer and Thermal Stress Analysis of an E...

John

John Holtz, P.E.
Global Product Support
Autodesk, Inc.

If not provided already, be sure to indicate the version of Inventor Nastran you are using!

"The knowledge you seek is at knowledge.autodesk.com" - Confucius 😉

arun_gopala · ‎03-29-2022

Thanks John. It was helpful. Appreciate it.

Thermal expansion tutorial

Thermal expansion tutorial

Forums Links

Post to forums