Meshmixer 3.5 Mac installer no longer available?

[dromero23]

I noticed that the Meshmixer 3.5 Mac installer is no longer available on the Meshmixer website. Only the Windows installer is listed. Will the Mac installer be added back to the site or is it no longer available? I realize that Autodesk no longer supports Meshmixer and encourages using Fusion 360 instead, but I thought the Meshmixer installers would remain available. We rely on Meshmixer for our curriculum and projects. Any advice is much appreciated.

[dromero23]

I noticed that the Meshmixer 3.5 Mac installer is no longer available on the Meshmixer website. Only the Windows installer is listed. Will the Mac installer be added back to the site or is it no longer available? I realize that Autodesk no longer supports Meshmixer and encourages using Fusion 360 instead, but I thought the Meshmixer installers would remain available. We rely on Meshmixer for our curriculum and projects. Any advice is much appreciated.

[hfcandrew]

Oh ya. Hmm also it appears MM 3.3 has been removed.

[hfcandrew]

Oh ya. Hmm also it appears MM 3.3 has been removed.

[fabian.spangler · Accepted solution]

Hi!

Sorry to say that, but we found a security issue in the macOS installer and decided to take it down from the website until this gets fixed at some point.

I can only recommend to switch to Fusion 360 for the future.

Thank you for your understanding!

[fabian.spangler · Accepted solution]

Hi!

Sorry to say that, but we found a security issue in the macOS installer and decided to take it down from the website until this gets fixed at some point.

I can only recommend to switch to Fusion 360 for the future.

Thank you for your understanding!

[MagWeb]

So sorry to say that I'm on hold in this community until this gets fixed at some point. I'm a macOS user.

Unfortunately current Fusion 360 mesh workspace is no substitute for MM.

[MagWeb]

So sorry to say that I'm on hold in this community until this gets fixed at some point. I'm a macOS user.

Unfortunately current Fusion 360 mesh workspace is no substitute for MM.

[dromero23]

Thank you Fabian. I would appreciate it if you can post an update when the Mac installer is fixed and back on the website. Unfortunately, Fusion 360 is not going to work for our curriculum, so I will look into other alternatives in case the Meshmixer Mac installer is not available by early 2022.

[dromero23]

Thank you Fabian. I would appreciate it if you can post an update when the Mac installer is fixed and back on the website. Unfortunately, Fusion 360 is not going to work for our curriculum, so I will look into other alternatives in case the Meshmixer Mac installer is not available by early 2022.

[TechBond]

This been sorted? I still can't find the installer for Mac and Fusion cannot do everything Meshmixer can as yet.

[TechBond]

This been sorted? I still can't find the installer for Mac and Fusion cannot do everything Meshmixer can as yet.

[paulRUXNZ]

This is absolutely true! Let's get this fixed!!

[paulRUXNZ]

This is absolutely true! Let's get this fixed!!

[fabian.spangler]

Hi everyone!
Unfortunately there's no update yet.

[fabian.spangler]

Hi everyone!
Unfortunately there's no update yet.

[mrknudson]

Wish there was a security update.

It's a great and lean software for students manipulating mesh but I have macs in my lab. Anyone have an alternative?

[mrknudson]

Wish there was a security update.

It's a great and lean software for students manipulating mesh but I have macs in my lab. Anyone have an alternative?

[hfcandrew]

Depending on what needs to be done: Meshlab, Blender, ZBrush. Sculptris,
Microsoft 3D Builder.

[hfcandrew]

Depending on what needs to be done: Meshlab, Blender, ZBrush. Sculptris,
Microsoft 3D Builder.

[walkergrantsales]

Any update on this? I would love to get meshmixer on my mac.

[walkergrantsales]

Any update on this? I would love to get meshmixer on my mac.

[bri.murphy]

I would also love to hear if Autodesk has an update on MeshMixer - the suggestion to switch to Fusion would be fine if Fusion was updated with the mesh tools we've come to rely on in MM. Even if there are not going to be any future updates to MM, please patch the security issue and put the Mac Installer back up so people can get back to using it (in my case, teaching dozens of students Autodesk products).

[bri.murphy]

I would also love to hear if Autodesk has an update on MeshMixer - the suggestion to switch to Fusion would be fine if Fusion was updated with the mesh tools we've come to rely on in MM. Even if there are not going to be any future updates to MM, please patch the security issue and put the Mac Installer back up so people can get back to using it (in my case, teaching dozens of students Autodesk products).

[kevinT5K8W]

You can use the Wayback Machine (Internet archive tool) to visit an old version of the Meshmixer website that still has the download button for Mac (Meshmixer 3.5). I got a new MBP and was shocked to see I could no longer install Meshmixer...luckily this worked for me 🙂

Link: https://web.archive.org/web/20200220222607/http://www.meshmixer.com/download.html

[kevinT5K8W]

You can use the Wayback Machine (Internet archive tool) to visit an old version of the Meshmixer website that still has the download button for Mac (Meshmixer 3.5). I got a new MBP and was shocked to see I could no longer install Meshmixer...luckily this worked for me 🙂

Link: https://web.archive.org/web/20200220222607/http://www.meshmixer.com/download.html

[bri.murphy]

Awesome, this worked like a charm! Your timing couldn't have been better, I am introducing a class to 3D modeling in two weeks and have been trying to find a suitable replacement for MM (there aren't any) so you really saved the day for me and 18 of my students. Thank you!

[bri.murphy]

Awesome, this worked like a charm! Your timing couldn't have been better, I am introducing a class to 3D modeling in two weeks and have been trying to find a suitable replacement for MM (there aren't any) so you really saved the day for me and 18 of my students. Thank you!

[dromero23]

Thank you for sharing the Wayback Machine tip! I want to point out to Autodesk that this is a potential workaround, but not a solution for education. We considered using the Wayback Machine for our curriculum, but did not because we would be asking students to download an installer with a known security issue. I hope that Autodesk fixes the security issue so we can continue to use Meshmixer for macOS in our curriculum.

[dromero23]

Thank you for sharing the Wayback Machine tip! I want to point out to Autodesk that this is a potential workaround, but not a solution for education. We considered using the Wayback Machine for our curriculum, but did not because we would be asking students to download an installer with a known security issue. I hope that Autodesk fixes the security issue so we can continue to use Meshmixer for macOS in our curriculum.

[gbucklandDSR5Z]

Another user here who would love to see the security issue fixed so that I can use Meshmixer (safely) on my MacOS machine.

[gbucklandDSR5Z]

Another user here who would love to see the security issue fixed so that I can use Meshmixer (safely) on my MacOS machine.

[thomasmost960]

Hi- thanks for the tip.  Unfortunately, when I tried reinstalling via the Time Machine link, I still get the same problem-- namely the library error.  I even tried installing 3.3, but get the same results.  Any ideas, anyone?

Thanks!

[thomasmost960]

Hi- thanks for the tip.  Unfortunately, when I tried reinstalling via the Time Machine link, I still get the same problem-- namely the library error.  I even tried installing 3.3, but get the same results.  Any ideas, anyone?

Thanks!

[lharshbe]

Thank you.  That helped.  

[lharshbe]

Thank you.  That helped.  

[michaelho888]

Is it possible to offer to pay Autodesk a subscription to continue MM support. I do not know how to conveniently direct you to a different  chat in this forum titled " Alternatives to Meshmixer" and you will find even the windows users are worried about losing MM. 

As I have posted in that forum MM is quite unique in its functionality, especially for the medical/dental fields ...  I have struggled with F360 without success to replicate the functionality of MM. The closet tool outside of Autodesk was SelfCAD but it was not able to deliver either.

Please Mr Spangler @fabian.spangler  if the community offers to pay a subscription can you let the "powers that be"  of Autodesk to revive the support for MM. I would gladly pay a fair fee. We really do not need additional functionality.  Just the occasional bugs and security fixes

Thanking you in hope

[michaelho888]

Is it possible to offer to pay Autodesk a subscription to continue MM support. I do not know how to conveniently direct you to a different  chat in this forum titled " Alternatives to Meshmixer" and you will find even the windows users are worried about losing MM. 

As I have posted in that forum MM is quite unique in its functionality, especially for the medical/dental fields ...  I have struggled with F360 without success to replicate the functionality of MM. The closet tool outside of Autodesk was SelfCAD but it was not able to deliver either.

Please Mr Spangler @fabian.spangler  if the community offers to pay a subscription can you let the "powers that be"  of Autodesk to revive the support for MM. I would gladly pay a fair fee. We really do not need additional functionality.  Just the occasional bugs and security fixes

Thanking you in hope

[tpfaff100]

Some kind of $10 donation for maintenance of the app would be worth it.

Through the 80s, 90s, 00s etc. Autodesk has never made another app I'd buy.... so this is your chance to get a least a few bucks outta me!

T

[tpfaff100]

Some kind of $10 donation for maintenance of the app would be worth it.

Through the 80s, 90s, 00s etc. Autodesk has never made another app I'd buy.... so this is your chance to get a least a few bucks outta me!

T