Hi!
I am getting crazy, maybe I am only tired.
Please help me.
Look at this:
The line in the red zone should be constrained.
I don't understand the behavior.
Attached the part.
Am I missing something?
Admaiora
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Solved! Go to Solution.
Solved by Frederick_Law. Go to Solution.
Solved by blandb. Go to Solution.
I opened your part, and it is?? What am I missing here? Do you get some weird behavior?
Yep.
The line shown should be unconstrained (but it's 10)
Admaiora
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I think I found it....the long horizontal line is also constrained to the 20 rad arc. Removing that opened the degree of freedom. Please see attached:
I spend far too much time looking for stupid stuff like that but the only choice is try like h$$l to avoid them or get no auto constraints. Somedays the choice is really really hard.
Make a sketch that is really too complicated and spend a half hour chasing the constraint that is making you crazy
I love you Inventor but you make it hard somedays. LOL
Sweet!!
You nailed!!!
Admaiora
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Can't find what you're looking for? Ask the community or share your knowledge.