Spur Gear Parameter help

[Anonymous]

Hi,

I generated spur gear with design accelerator. Now I can't understand the parameters. Means I want to know pitch circle diameter, but in parameter i can see, da_z, da_a etc. Which on is the pitch circle diameter?

And I also want other dimentions list, like module, No. of teeth etc. How can I find them?

[Anonymous]

Hi,

I generated spur gear with design accelerator. Now I can't understand the parameters. Means I want to know pitch circle diameter, but in parameter i can see, da_z, da_a etc. Which on is the pitch circle diameter?

And I also want other dimentions list, like module, No. of teeth etc. How can I find them?

[mdavis22569]

da_z, is the teeth count...

Look at the table for making the gear ..and look at the Generator and see what matches what value ...

or attach your gears here 

[mdavis22569]

da_z, is the teeth count...

Look at the table for making the gear ..and look at the Generator and see what matches what value ...

or attach your gears here 

[Anonymous]

Thanks for your help,

but this didn't work.

I open spur gear generator and tried to match the parameters but i couldn't find the matches. then i generated new gear pair and tried again. Now new generated pair has da_d and da_dw 60 mm. In gear generator dialog box d was pitchcercle diameter with 60 mm value. means da_d and da_dw both are pitch circle diameter. 

But I my previious gear pair value of this two are different ! So which value I should take as pitch cirlce, da_d or da_dw?

And Is there any way i can add a table of parameter from part file directly in drawing ?

[Anonymous]

Thanks for your help,

but this didn't work.

I open spur gear generator and tried to match the parameters but i couldn't find the matches. then i generated new gear pair and tried again. Now new generated pair has da_d and da_dw 60 mm. In gear generator dialog box d was pitchcercle diameter with 60 mm value. means da_d and da_dw both are pitch circle diameter. 

But I my previious gear pair value of this two are different ! So which value I should take as pitch cirlce, da_d or da_dw?

And Is there any way i can add a table of parameter from part file directly in drawing ?

[mdavis22569]

Change one and see what happens ... 

or post the set that you want values for ...and their values 

[mdavis22569]

Change one and see what happens ... 

or post the set that you want values for ...and their values 

[Anonymous]

I have attached excel file with all parameter list and values, 

[Anonymous]

I have attached excel file with all parameter list and values, 

[mdavis22569]

da_aw is work Center Distance
da_b is width
da_beta is angle Beta
da_d Pitch is diameter
da_da is Outside Diameter
da_df is Root Diameter
da_dw is work pitch diameter
da_z is number of teeth for Gear1
da_z2 is number of teeth for Gear2
da_lefttooth 1/0 Yes/No Allow is left helix teeth
da_righttooth 1/0 Yes/No Allow is rigth helix teeth
da_straigthtooth 1/0 Yes/No Allow is straigth teeth

[mdavis22569]

da_aw is work Center Distance
da_b is width
da_beta is angle Beta
da_d Pitch is diameter
da_da is Outside Diameter
da_df is Root Diameter
da_dw is work pitch diameter
da_z is number of teeth for Gear1
da_z2 is number of teeth for Gear2
da_lefttooth 1/0 Yes/No Allow is left helix teeth
da_righttooth 1/0 Yes/No Allow is rigth helix teeth
da_straigthtooth 1/0 Yes/No Allow is straigth teeth

[Anonymous]

Thanks Can I make a table of this data directly in my drawing?

[Anonymous]

Thanks Can I make a table of this data directly in my drawing?

[mdavis22569 · Accepted solution]

I don't believe so ..

I was just showing you what each value means ..

So you could go into your parameters and export them ...and populate whatever you'd like to with it.

lets trying this:

What is the end result you want to see and do?

[mdavis22569 · Accepted solution]

I don't believe so ..

I was just showing you what each value means ..

So you could go into your parameters and export them ...and populate whatever you'd like to with it.

lets trying this:

What is the end result you want to see and do?