Rib feature "missing" in Inventor 2015?

[Anonymous]

I downloaded Autodesk Inventor Professional 2015 a month ago for the class I am taking.  One of the projects is to add ribs to an oval object, however the "Rib" feature is not under the Modify section nor the create section in the 3DModel tab. 

I downloaded all the updates/packs today but it is still not there.

Is it somewhere else?  Do I need to download something else?

I have searched in the forum and in the help sections but did not come across any answers.

Thank you!

[mcgyvr]

If you right mouse click on the ribbon and go to "customize user commands" is it listed in there? (Ribbon Tab..Chose Commands from: All Commands)

Maybe you just removed the button..

There have been some changes over the years to where commands are located.. It may be in a different location..

But if you find it in the customze user commands section and hover over it then it will tell the location of where it is..

like this..

[Curtis_Waguespack]

Hi kowaleckic,

Try under the Sweep drop down.

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

[Curtis_Waguespack]

Note too that you can ungroup the commands if it helps:

Ungroup commands from drop-down menu

• Right-click a command that has a drop-down arrow, and select Ungroup Commands from Drop-Down Menu.

The commands from the drop-down menu display on the panel.

http://help.autodesk.com/view/INVNTOR/2015/ENU/?guid=GUID-129D10A7-5768-476F-BE1D-9D208C0FE969