Community

reading draft

reading draft

Anonymous
Not applicable
722 Views
5 Replies
Message 1 of 6

reading draft

Anonymous
Not applicable
‎01-28-2016 08:59 AM

Hi there!

How do I read the following (green) naration?reading drawings.jpg

thanks!!!!!!

0 Likes
Like
Report
Accepted solutions (3)
Solution 1
Solution 2
Solution 3
723 Views
5 Replies
Replies (5)
Message 2 of 6

mcgyvr
Consultant
Consultant
‎01-28-2016 09:12 AM
Accepted solution
@Anonymous wrote:

Hi there!

How do I read the following (green) naration?reading drawings.jpg

thanks!!!!!!

Its a 6mm dia through hole with a 12mm dia x 5mm deep counterbore and there are 2 of those on that part.



-------------------------------------------------------------------------------------------
Inventor 2023 - Dell Precision 5570

Did you find this reply helpful ? If so please use the Accept Solution button below.
Maybe buy me a beer through Venmo @mcgyvr1269
Report
Message 3 of 6

JDMather
Consultant
Consultant
‎01-28-2016 09:23 AM
Accepted solution

...and when you use the Hole command...

 

Counterbore.png


-----------------------------------------------------------------------------------------
Autodesk Inventor 2019 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional


Report
Message 4 of 6

Mark.Lancaster
Consultant
Consultant
in reply to JDMather
‎01-28-2016 11:22 AM
Accepted solution

To go along with JDMather and mcgyvr posting..  Review this document

Mark Lancaster


  &  Autodesk Services MarketPlace Provider


Autodesk Inventor Certified Professional & not an Autodesk Employee


Likes is much appreciated if the information I have shared is helpful to you and/or others


Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.

Report
Message 5 of 6

Anonymous
Not applicable
in reply to Mark.Lancaster
‎01-29-2016 03:31 AM

Hi, guys!

 

Thanks for all replies!

 

 

@Mark.Lancaster, thanks for  the tutorial,

Is  there something less complicted?

I am able to read this, but I will not be able to remember everything

 

😞

0 Likes
Like
Report
Message 6 of 6

mcgyvr
Consultant
Consultant
in reply to Anonymous
‎01-29-2016 05:31 AM
@Anonymous wrote:

Hi, guys!

 

Thanks for all replies!

 

 

@Mark.Lancaster, thanks for  the tutorial,

Is  there something less complicted?

I am able to read this, but I will not be able to remember everything

 

😞

Ha Ha... Welcome to life...

 

 

 

 



-------------------------------------------------------------------------------------------
Inventor 2023 - Dell Precision 5570

Did you find this reply helpful ? If so please use the Accept Solution button below.
Maybe buy me a beer through Venmo @mcgyvr1269
0 Likes
Like
Report
Report a website issue