Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Does anyone know of a way to make rack gears, which will work with motion constrains, base on pinion gears created by the AutoCad Inventor 11 Generator?
Does anyone know of a way to make rack gears, which will work with motion constrains, base on pinion gears created by the AutoCad Inventor 11 Generator?
I think you will have to model the rack gear.
There is an example in the Samples... Arbor Press.
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
I think you will have to model the rack gear.
There is an example in the Samples... Arbor Press.
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
Attached is some parameter driven gearrack that I think was adapted from the iPart on CBliss' site. There are many other parts there as well. The gearrack is only modeled for an initial section of teeth. We found this greatly improved update times for idw's.
Attached is some parameter driven gearrack that I think was adapted from the iPart on CBliss' site. There are many other parts there as well. The gearrack is only modeled for an initial section of teeth. We found this greatly improved update times for idw's.
> Does anyone know of a way to make rack gears, which will work with
> motion constrains, base on pinion gears created by the AutoCad
> Inventor 11 Generator?
> Does anyone know of a way to make rack gears, which will work with
> motion constrains, base on pinion gears created by the AutoCad
> Inventor 11 Generator?
