Invalid Axis Origin

[Jose_Merino]

I'm using Inventor 2016, I making a parametrical rectangular elbow, at the end of the elbow I have a sleeve of 3 inches, if my elbow is 60 in or less I have a lip at the end of the sleeve, (fig-1), is my elbow is bigger than 61 in this lip is suppress and i have to make a cut in the sleeve, at this point my sleeve will be 2.75 inches instead of 3 inches (fig-2) when I star to test my elbow, chang sizes and angles, at some point I have this message (fig-3) and I don't know how to fix it, any idea.

Thank You.

Fig-1

Fig-2

Fig-3

[CCarreiras]

HI!

Edit the sketch and select a new point to be the the origin of the sketch.

[Jose_Merino]

My sketch is a project geometry

[CCarreiras · Accepted solution]

Could be... but still, it have his own origin...
Now, it have a problem in the old location, and you have to create/select a new one...

[johnsonshiue]

Hi! I believe it is a bug. This means somehow the geometry that the sketch is associative to is no longer recognized. If possible, please share the file with me (johnson.shiue@autodesk.com). I will work with the project team to understand the behavior better.

Many thanks!