Install

[Anonymous]

I am trying to install IV6, it will not start the installation. Why?

[Anonymous]

Turn off all running programs including TSR's (tray programs). Also disable antivirus software.

MechMan

[Anonymous]

Your computer is trying to tell you something
"Jerry" wrote in message
news:f121a5d.-1@WebX.maYIadrTaRb...
> I am trying to install IV6, it will not start the installation. Why?
>
>

[Anonymous]

Did all that, still no luck. CD spins, that's all.

[Anonymous]

Can you read the cd directory?

Hold down shift on door close or turn off
autorun.

darvin

[Anonymous]

Yes, can read cd in windows
explorer.

[Anonymous]

Do you have room to try copying the whole CD to a directory on your harddrive and running
it there?

It is always possible a CD is bad. 8^(

--
Kent
Member of the Autodesk Discussion Forum Moderator Program


"Jerry" wrote in message
news:BC2B1011CDC5398D7AF2B0234D3D7F74@in.WebX.maYIadrTaRb...
> Yes, can read cd in windows explorer.

[Anonymous]

jerry,

    See if you can copy to a
harddrive directory. Run setup from there.

darvin

[Anonymous]

Copied to hard drive, still can't start
it.

[Anonymous]

How about a boot to "Safe Mode"? If that don't do
it, I'd say bad cd!!

darvin

[Anonymous]

Safe mode did not do it.  Don't know what to
do now!

[Anonymous]

I would start by contacting your dealer.

--
Kent Keller
Member of the Autodesk Discussion Forum Moderator Program

http://www.MyMcad.com/KWiK/Mcad.htm

"Jerry" wrote in message
news:1A7822F6CB904A7F0E502DDA69969B85@in.WebX.maYIadrTaRb...
> Safe mode did not do it. Don't know what to do now!

[Anonymous]

Try running the install on another computer. Preferrably one with a
different OS. You don't have to install IV on that computer, just see if the
install routine will start. If not then I'd definately say it's a bad CD.

MechMan

[Anonymous]

The quality of these cd's is poor or the machine
labeller is rubbish, this is the second set I have had that rattles and hums. My
premium cdr's do not, maybe its just the eccentric label?

--
Laurence,
--

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"darvinv" <
href="mailto:darvinv@avicom.net">darvinv@avicom.net> wrote in message

href="news:56C0307DDEEF4CC5FE04BCBDD734156A@in.WebX.maYIadrTaRb">news:56C0307DDEEF4CC5FE04BCBDD73......

How about a boot to "Safe Mode"? If that don't do
it, I'd say bad cd!!

darvin

[Anonymous]

Did you try running the msi instead of the exe?

- Drew

--
Drew Fulford B.A.Sc. Systems Engineer
Solid Caddgroup Inc. Burlington, Ontario
Tel: (905)331-9670, Fax: (905)331-7280
Corporate: http://www.solidcadcam.com/

Member of the Autodesk Discussion Forum Moderator Program
Visit my MCAD website @ http://www.mymcad.com/



"Jerry" wrote in message
news:1A7822F6CB904A7F0E502DDA69969B85@in.WebX.maYIadrTaRb...
> Safe mode did not do it. Don't know what to do now!
>

[Anonymous]

In Jerry wrote:
> I am trying to install IV6, it will not start the installation. Why?
>
>
>

What OS? If it is Win 98. It is not supported.

-Kevin Schneider

[Anonymous]

In Jerry wrote:
> I am trying to install IV6, it will not start the installation. Why?
>
>
>

What OS? If it is Win 98. It is not supported.

-Kevin Schneider

[Anonymous]

You should start by reinstalling Microsoft System
Installer (MSI).  You can get that
href="http://download.microsoft.com/download/WindowsInstaller/Install/2.0/NT45/EN-US/InstMsiW.exe">.... 
That link assumes that you are using WinNT or Win2K.

<Kevin Schneider>; "Autodesk" <
href="mailto:kevin.schneider@autodesk.com">
size=2>kevin.schneider@autodesk.com> wrote
in message
face=Arial size=2>news:20021110205250774-0800@iBook.local
face=Arial size=2>....

> In <
href="mailto:f121a5d.-1@WebX.maYIadrTaRb">
size=2>f121a5d.-1@WebX.maYIadrTaRb> Jerry
wrote:
> >   I am trying to install IV6, it will not start
the installation.  Why?
> >
> >
> >
>

> What OS? If it is Win 98. It is not supported.
>
> -Kevin
Schneider