How does one trim only specific co-planar parts off a solid?

[Anonymous]

Student using Inventor 2019 on Windows 10 here.

I tried to trim one side off this c-channel using the "Trim Solids" feature using the "Trim Solid" feature using the plane in picture 1.

However, doing this seems to trim off both sides of the c-channel (as shown in picture 2).

What I want is what's shown in picture 3; I got this result by drawing a sketch with a rectangle and using the cut feature. This method feels sloppy, and I can imagine, for more complex parts at least, not ideal. 

How can I get the same solid in picture 3 without having to draw a sloppy sketch?

I want to trim just the top side of the c-channel.Using the "Trim Solid" feature gets me this.This is the result I want, but without needing to draw a sketch like this every time.

[Anonymous]

Student using Inventor 2019 on Windows 10 here.

I tried to trim one side off this c-channel using the "Trim Solids" feature using the "Trim Solid" feature using the plane in picture 1.

However, doing this seems to trim off both sides of the c-channel (as shown in picture 2).

What I want is what's shown in picture 3; I got this result by drawing a sketch with a rectangle and using the cut feature. This method feels sloppy, and I can imagine, for more complex parts at least, not ideal. 

How can I get the same solid in picture 3 without having to draw a sloppy sketch?

I want to trim just the top side of the c-channel.Using the "Trim Solid" feature gets me this.This is the result I want, but without needing to draw a sketch like this every time.

[j.palmeL29YX · Accepted solution]

Split the part horizontally into 2 bodies. Trim one of the bodies. Then combine the 2 remaining bodies to one solid.

cadder

[j.palmeL29YX · Accepted solution]

Split the part horizontally into 2 bodies. Trim one of the bodies. Then combine the 2 remaining bodies to one solid.

cadder

[JDMather · Accepted solution]

Do one neat sketch and Extrude-Intersect what you want to keep.

(See Attached)

BTW - this entire part could have been modeled significantly easier technique.

Edit: Oops, I made a mistake and cut off the fillet. Back in a minute.

[JDMather · Accepted solution]

Do one neat sketch and Extrude-Intersect what you want to keep.

(See Attached)

BTW - this entire part could have been modeled significantly easier technique.

Edit: Oops, I made a mistake and cut off the fillet. Back in a minute.

[blandb]

Remember, just cutting away the flange you will still have the radius on the back of the part. Is that what you want, or for it to be square?

[blandb]

Remember, just cutting away the flange you will still have the radius on the back of the part. Is that what you want, or for it to be square?

[Anonymous]

It is fine if it's left rounded because this is how an actual cut would look on a bracket like this.

[Anonymous]

It is fine if it's left rounded because this is how an actual cut would look on a bracket like this.

[SBix26]

Another possibility-- just create a trim surface like so:

Edit: the surface isn't actually necessary, the sketch alone can be used as the trim tool.

---

Sam B
Inventor Pro 2019.3 | Windows 7 SP1
LinkedIn

[SBix26]

Another possibility-- just create a trim surface like so:

Edit: the surface isn't actually necessary, the sketch alone can be used as the trim tool.

---

Sam B
Inventor Pro 2019.3 | Windows 7 SP1
LinkedIn

[johnsonshiue]

Hi Guys,

There are indeed multiple ways to do this. Or, you can use Thicken command -> Cut to remove the unwanted portion. Thicken -> uncheck "Auto-Blend" option -> Cut -> select the face -> set distance equal or greater than Thickness.

Many thanks!

[johnsonshiue]

Hi Guys,

There are indeed multiple ways to do this. Or, you can use Thicken command -> Cut to remove the unwanted portion. Thicken -> uncheck "Auto-Blend" option -> Cut -> select the face -> set distance equal or greater than Thickness.

Many thanks!