help needed with this model (learning slowly)

[meguinness1]

hi guys , im try to recrate the model in the photo....im not a pro and can do some basic designs in inventor but im not able to recreate the 2x sockets holes at a angle on a flat surface .

can you help me please ?

using inventor pro 2021

thanx

[IgorMir · Accepted solution]

Here is one of the ways of getting it done. Please see the attached file in IV2020 format.

Cheers,

Igor.

[JDMather]

@meguinness1 

You should always Attach the *.ipt file of your attempt here.

It doesn’t have to be finished or correct, just best you can do without help.

[meguinness1]

thank you for your reply guys , i have attached the my  .ipt file .

the sockets need to be on the side where the 2x side slots are....facing down the the Fillet edge.

thanx 

[SBix26 · Accepted solution]

Here's another way to tackle the problem (Inventor 2021 file).  Of course I guessed at many dimensions that you didn't include.

---

Sam B

Inventor Pro 2023.2 | Windows 10 Home 21H2

[meguinness1]

thank you guys ...i will be studying the .ipt 

[JDMather · Accepted solution]

@meguinness1 

Examine the Attached file...