Community
How to check table flipping. I tried everything but the table still wouldn't turn. I adjusted my weight to 50kg but still can't. Does anyone have a way to help me? Thank you very much. I have attached the file below
Can you attach ALL the files?
Admaiora
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Facebook | Twitter | Youtube
Hi, i am sorry, there are still misisng parts.
D100.ipt
10 Kg.ipt
Admaiora
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Facebook | Twitter | Youtube
D100.ipt and 10kg.ipt I created my own library. I replaced it with the zip file test_table. D100.ipt replaced with loading pad and 10kg.ipt replaced with Weight. Everything is complete, including details, floor, weight and loading pad. You can try again and open it. I tested the simulation again but still can't
Despite the fact that the assembly is still not correct,
the load was placed inside of the green sketched contact area (defined by the 4 "feets").
What do you expext? The table will never tip over, even if you increase the load. (Only the legs will break 😉 ).
Jürgen Palme
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Forums Links
Can't find what you're looking for? Ask the community or share your knowledge.
Post to forums
