Do iLogic Cope

[Anonymous]

Imagine, you have to place  array of scale-down holes on a nonplanar surface. Is it possible to implement this problem through iLogic function? And use it in the future for different surfaces?

[Ron_Jones1122]

You would need some point of reference for iLogic to work. If you always have points and planes then yes you could make it work 

[Anonymous]

OK. Thank you. And how to make an array of holes with the diameter reduction?

[Ron_Jones1122]

I would draw the holes with specific parameter names for the diameter. you could then drive this in iLogic. 

[Anonymous]

And how to get rid of errors in the operation of the extrusion holes?

[Ron_Jones1122]

Can you include the part file?

[Anonymous]

attach a file to your message?

[Curtis_Waguespack · Accepted solution]

Hi E99A5E0BA,

I think this can be done. However... It will beyond the "native" iLogic abilities, and require Inventor's API.

I would encourage you to close this thread and start a new one on the Inventor Customization forum :
http://forums.autodesk.com/t5/Autodesk-Inventor-Customization/bd-p/120

Post your example file on that new topic if you can, and I suspect someone will take on the challenge.

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com