Hello,
When i draw a cirlcle it's not displayed as a round circle. Does anybody know how to fix this?
Circles in sketch are not round
Can you Attach your file here that exhibits this behavior?
Is this a new issue, it used to work but now it doesn't? Or did it never work correctly?
What are your system specs - especially graphics card?
What version of Inventor are you running?
How far is your geometry from the Origin?
Why are the same dimensions repeated multiple times?
Is your Display Quality set to Smooth, Medium or Rough?
The file you posted looks nothing like the images you posted:
One sketch containing four sketch blocks, all similar to what you see above. Wrong file, perhaps?
Sam B
Inventor Pro 2024 | Windows 10 Home 22H2
This is most likely due to hardware/software performance. Your sketch is ~63 m; it's a lot. However, exact mathematical cylinders are created during the extrusion operation.
Kacper Suchomski
YouTube - Inventor tutorials | LinkedIn | Instagram
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
OK, I didn't zoom in far enough to see the circles! And yes, it is very large for Inventor's math to work reliably, especially in graphics.
Sam B
Inventor Pro 2024 | Windows 10 Home 22H2
Hi! The problem is indeed with the distance between the origin and the block definition geometry. Edit the sketch block "deel1." Move the cursor to the geometry. You will see the coordinate reading on the lower right is extremely large.
I suggest you delete the Fixed constraints and move the sketch geometry closer to the origin. Then the circles will be circles.
Many thanks!
