basic constraint problem

[elmehdimabrouk]

hi!

i want part 1 to be in the middle of part 4, knowing that part 1 is already constrained flush with part 4.

if a=90 i can flash it with part 2 or 3 with an off-set but a=73.

thank you!

[JDMather]

Attach your file(s) here.

[SharkDesign]

What part do you want 1 to be constrained with? Your description is confusing.

Do you always want 1 to be parallel with the ground?

Mate the central axis of 1 and 4 and apply an angle constraint between 1 and the ground.

[elmehdimabrouk]

here it is

[JDMather]

---

@elmehdimabrouk wrote:

here it is

---

An assembly must include parts.

[johnsonshiue]

Hi! I suppose you can use Symmetric constraint. But, without see the files, it is impossible to tell. Please zip up the files and attach it here.

Many thanks!

[elmehdimabrouk]

it includes 2 parts

stru-lmnr cipied one time & stuc-lmnr2 copeid 4 times

[elmehdimabrouk]

here it is

[johnsonshiue]

Hi! Please share the ipt files also. Zip them up and attach it.

Many thanks!

[elmehdimabrouk]

this file contains the parts and assambly

thank you !

[elmehdimabrouk]

like this ?

[johnsonshiue]

Hi! This case can be done by Axial-Axial mate. The faces are not parallel. I have re-attached the same assembly files in zip so JD can take a look. 

Many thanks!

[elmehdimabrouk]

yeah axial-axial mate !!
i made it
thank you a lot, all of you