ASTM A325 Bolts?

[Anonymous]

The content center has no ASTM spec high strength structural bolts. As far as i know these are fairly common in industry and so I am wondering why they aren't in the content center, and if anyone has created an adjustable one I can get. This is for  stress analysis on shearing bolts and as such i need a really precise model. Please let me know

Inventor 2011 Pro

ASTM A325 High Strenght Structural Bolt : 1" D x 39/64" H x 1-5/8" F x 3.5433" long.

[Anonymous]

The content center has no ASTM spec high strength structural bolts. As far as i know these are fairly common in industry and so I am wondering why they aren't in the content center, and if anyone has created an adjustable one I can get. This is for  stress analysis on shearing bolts and as such i need a really precise model. Please let me know

Inventor 2011 Pro

ASTM A325 High Strenght Structural Bolt : 1" D x 39/64" H x 1-5/8" F x 3.5433" long.

[Anonymous]

Is the generic "Heavy Hex Bolt" ASTM spec and i'm just silly?

[Anonymous]

Is the generic "Heavy Hex Bolt" ASTM spec and i'm just silly?

[rregaladoUSLWT · Accepted solution]

Use the Heavy Hex Structural Bolt. B18.2.6 is what you want.

[rregaladoUSLWT · Accepted solution]

Use the Heavy Hex Structural Bolt. B18.2.6 is what you want.

[Frederick_Law · Accepted solution]

Copy to custom and rename.

Edit table and rename.  Change material if you need.  Add missing size.  Delete size you don't use.

I just need the name in BOM.

[Frederick_Law · Accepted solution]

Copy to custom and rename.

Edit table and rename.  Change material if you need.  Add missing size.  Delete size you don't use.

I just need the name in BOM.

[blandb · Accepted solution]

As @Frederick_Law had mentioned. We used F436 FW, A325, ANCO Lock nuts, but none of them were in the CC. So we just used a family that was close and modified to suite what we needed such as descriptions, finishes, etc.

[blandb · Accepted solution]

As @Frederick_Law had mentioned. We used F436 FW, A325, ANCO Lock nuts, but none of them were in the CC. So we just used a family that was close and modified to suite what we needed such as descriptions, finishes, etc.

[CGBenner]

The post is old, but my forum heroes finally provide some answers!  Thanks everyone!  I'll mark some soluitons so others can find this.

[CGBenner]

The post is old, but my forum heroes finally provide some answers!  Thanks everyone!  I'll mark some soluitons so others can find this.