Re: Assembly Features and my stupidy

Anonymous · ‎11-04-2002

Is it just me or is anyone else doing this...

Since we now have assembly features the sketch button is active in an
assembly so I hit it and start editing a part only to realize after I'm done
that I wasn't editing the part but adding an assembly feature. So
anyone else want to admit their stupidity?

I've done it three times today.
--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------

Anonymous · ‎11-04-2002

Sean,
I have yet to find a reason why to add a, say, fillet, as an assembly
feature?
(admitting my stupidity hereby)

Regards,
--
Leo Laimer
Maschinen- und Fertigungstechnik
A-4820 Bad Ischl - Austria

"Sean Dotson" schrieb im Newsbeitrag
news:96FE69F7982CD32A3C285A526243F09B@in.WebX.maYIadrTaRb...
> Is it just me or is anyone else doing this...
>
> Since we now have assembly features the sketch button is active in an
> assembly so I hit it and start editing a part only to realize after I'm
done
> that I wasn't editing the part but adding an assembly feature. So
> anyone else want to admit their stupidity?
>
> I've done it three times today.
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
>
>

Anonymous · ‎11-04-2002

It's just you... 🙂

Actually, what I want to see in assembly features is the ability to create an AF
and then manually decide to "propagate" that feature to the affected parts....
Like using AF to drill an adaptive hole through various parts....

Dennis

Sean Dotson wrote:

> Is it just me or is anyone else doing this...
>
> Since we now have assembly features the sketch button is active in an
> assembly so I hit it and start editing a part only to realize after I'm done
> that I wasn't editing the part but adding an assembly feature. So
> anyone else want to admit their stupidity?
>
> I've done it three times today.
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------

--
Dennis Jeffrey
CAD Associates - Fort Wayne
Autodesk ASC
(260-432-9695 x 221

Anonymous · ‎11-04-2002

"It's just you... :)"

Gee, thanks for the support...

I was told that this was planned for future implementation. Actually it
would solve my problem right now wouldn't it

--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"Dennis Jeffrey" wrote in message
news:3DC6AF01.CCE8F1A9@cadassociates.com...
> It's just you... 🙂

Anonymous · ‎11-04-2002

It's my understanding that its under consideration also....... I brought it
up in beta.

Years ago (MDT2) there was a third party that could do it..... I think they
are gone now..... Piercing multi-parts would be a great help....

Dennis

Sean Dotson wrote:

> "It's just you... :)"
>
> Gee, thanks for the support...
>
> I was told that this was planned for future implementation. Actually it
> would solve my problem right now wouldn't it
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
> "Dennis Jeffrey" wrote in message
> news:3DC6AF01.CCE8F1A9@cadassociates.com...
> > It's just you... 🙂

--
Dennis Jeffrey
CAD Associates - Fort Wayne
Autodesk ASC
(260-432-9695 x 221

Anonymous · ‎11-04-2002

Dennis,
I had this third party for MDT2, it was really great:
- select screw connection (bolt, washers, nuts...)
- select hole location
- select termination of hole
- relax, take a sip of coffe, watch MDT drill the hole and insert the
complete fastener.
Really great!
Adesk liked this too, so they bought this third party, truncated of large
chunks, and remarketed it as PP.

Regards,
--
Leo Laimer
Maschinen- und Fertigungstechnik
A-4820 Bad Ischl - Austria

"Dennis Jeffrey" schrieb im Newsbeitrag
news:3DC6B2E1.F188ED16@cadassociates.com...
> It's my understanding that its under consideration also....... I brought
it
> up in beta.
>
> Years ago (MDT2) there was a third party that could do it..... I think
they
> are gone now..... Piercing multi-parts would be a great help....
>
> Dennis
>
>
> Sean Dotson wrote:
>
> > "It's just you... :)"
> >
> > Gee, thanks for the support...
> >
> > I was told that this was planned for future implementation. Actually it
> > would solve my problem right now wouldn't it
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > remove all #s from email
> > -----------------------------------------
> > "Dennis Jeffrey" wrote in message
> > news:3DC6AF01.CCE8F1A9@cadassociates.com...
> > > It's just you... 🙂
>
> --
> Dennis Jeffrey
> CAD Associates - Fort Wayne
> Autodesk ASC
> (260-432-9695 x 221
>
>

Anonymous · ‎11-04-2002

🙂

How true... but this was an outfit out of Michigan, USA... 🙂

Dennis

Leo Laimer wrote:

> Dennis,
> I had this third party for MDT2, it was really great:
> - select screw connection (bolt, washers, nuts...)
> - select hole location
> - select termination of hole
> - relax, take a sip of coffe, watch MDT drill the hole and insert the
> complete fastener.
> Really great!
> Adesk liked this too, so they bought this third party, truncated of large
> chunks, and remarketed it as PP.
>
> Regards,
> --
> Leo Laimer
> Maschinen- und Fertigungstechnik
> A-4820 Bad Ischl - Austria
>
> "Dennis Jeffrey" schrieb im Newsbeitrag
> news:3DC6B2E1.F188ED16@cadassociates.com...
> > It's my understanding that its under consideration also....... I brought
> it
> > up in beta.
> >
> > Years ago (MDT2) there was a third party that could do it..... I think
> they
> > are gone now..... Piercing multi-parts would be a great help....
> >
> > Dennis
> >
> >
> > Sean Dotson wrote:
> >
> > > "It's just you... :)"
> > >
> > > Gee, thanks for the support...
> > >
> > > I was told that this was planned for future implementation. Actually it
> > > would solve my problem right now wouldn't it
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > remove all #s from email
> > > -----------------------------------------
> > > "Dennis Jeffrey" wrote in message
> > > news:3DC6AF01.CCE8F1A9@cadassociates.com...
> > > > It's just you... 🙂
> >
> > --
> > Dennis Jeffrey
> > CAD Associates - Fort Wayne
> > Autodesk ASC
> > (260-432-9695 x 221
> >
> >

--
Dennis Jeffrey
CAD Associates - Fort Wayne
Autodesk ASC
(260-432-9695 x 221

Anonymous · ‎11-04-2002

Been there, done that, scratched my head and went back and cleaned up the
mess.

"Sean Dotson" wrote in message
news:96FE69F7982CD32A3C285A526243F09B@in.WebX.maYIadrTaRb...
> Is it just me or is anyone else doing this...
>
> Since we now have assembly features the sketch button is active in an
> assembly so I hit it and start editing a part only to realize after I'm
done
> that I wasn't editing the part but adding an assembly feature. So
> anyone else want to admit their stupidity?
>
> I've done it three times today.
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
>
>

Anonymous · ‎11-05-2002

This was MSCC in Fluching MI.
They are now CADfx www.cadfx.com.

--
Regards,
Jason Ruge
Manufacturing Product Support
Autodesk, Inc.

"Dennis Jeffrey" wrote in message
news:3DC6B82B.FCFBBD87@cadassociates.com...
> 🙂
>
> How true... but this was an outfit out of Michigan, USA... 🙂
>
> Dennis
>
> Leo Laimer wrote:
>
> > Dennis,
> > I had this third party for MDT2, it was really great:
> > - select screw connection (bolt, washers, nuts...)
> > - select hole location
> > - select termination of hole
> > - relax, take a sip of coffe, watch MDT drill the hole and insert the
> > complete fastener.
> > Really great!
> > Adesk liked this too, so they bought this third party, truncated of
large
> > chunks, and remarketed it as PP.
> >
> > Regards,
> > --
> > Leo Laimer
> > Maschinen- und Fertigungstechnik
> > A-4820 Bad Ischl - Austria
> >
> > "Dennis Jeffrey" schrieb im Newsbeitrag
> > news:3DC6B2E1.F188ED16@cadassociates.com...
> > > It's my understanding that its under consideration also....... I
brought
> > it
> > > up in beta.
> > >
> > > Years ago (MDT2) there was a third party that could do it..... I think
> > they
> > > are gone now..... Piercing multi-parts would be a great help....
> > >
> > > Dennis
> > >
> > >
> > > Sean Dotson wrote:
> > >
> > > > "It's just you... :)"
> > > >
> > > > Gee, thanks for the support...
> > > >
> > > > I was told that this was planned for future implementation.
Actually it
> > > > would solve my problem right now wouldn't it
> > > >
> > > > --
> > > > Sean Dotson, PE
> > > > http://www.sdotson.com
> > > > remove all #s from email
> > > > -----------------------------------------
> > > > "Dennis Jeffrey" wrote in message
> > > > news:3DC6AF01.CCE8F1A9@cadassociates.com...
> > > > > It's just you... 🙂
> > >
> > > --
> > > Dennis Jeffrey
> > > CAD Associates - Fort Wayne
> > > Autodesk ASC
> > > (260-432-9695 x 221
> > >
> > >
>
> --
> Dennis Jeffrey
> CAD Associates - Fort Wayne
> Autodesk ASC
> (260-432-9695 x 221
>
>

Anonymous · ‎11-08-2002

can't you do that with Cross-part association and/or adaptivity?

--
K

"Dennis Jeffrey" wrote in message
news:3DC6AF01.CCE8F1A9@cadassociates.com...
> It's just you... 🙂
>
> Actually, what I want to see in assembly features is the ability to create
an AF
> and then manually decide to "propagate" that feature to the affected
parts....
> Like using AF to drill an adaptive hole through various parts....
>

Anonymous · ‎11-08-2002

Yes you can. This would just be a quicker way to do it

--
Sean Dotson, PE
http://www.sdotson.com
...sleep is for the weak..
-----------------------------------------
"Karl Maas" wrote in message
news:76770FB05D04D2ADCB0982FF596FEB0E@in.WebX.maYIadrTaRb...
> can't you do that with Cross-part association and/or adaptivity?
>
> --
> K
>
>
> "Dennis Jeffrey" wrote in message
> news:3DC6AF01.CCE8F1A9@cadassociates.com...
> > It's just you... 🙂
> >
> > Actually, what I want to see in assembly features is the ability to
create
> an AF
> > and then manually decide to "propagate" that feature to the affected
> parts....
> > Like using AF to drill an adaptive hole through various parts....
> >
>
>

Assembly Features and my stupidy

Assembly Features and my stupidy

Assembly Features and my stupidy

Forums Links

Post to forums