Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hello sir. After I exported the corridor from civil 3D to infraworks, the design elevation was much higher than the existing one. What's the problem, sir? Please provide a solution. I use civil 3d 21 and IW 21 sir
Hello sir. After I exported the corridor from civil 3D to infraworks, the design elevation was much higher than the existing one. What's the problem, sir? Please provide a solution. I use civil 3d 21 and IW 21 sir
Hall sir. Thank you sir. I don't know what the appropriate height is, sir. How to set the terrain height in infraworks to be the same as civill 3d sir?
Hall sir. Thank you sir. I don't know what the appropriate height is, sir. How to set the terrain height in infraworks to be the same as civill 3d sir?
you cannot set the terrain height in InfraWorks. The terrain must be loaded from a datasource.
For example, you could create a Model Builder model of your area of interest. This model comes with SRTM elevation data. You can load any other raster data that represents terrain. Or you simply load the surfaces from your Civil 3D DWG.
you cannot set the terrain height in InfraWorks. The terrain must be loaded from a datasource.
For example, you could create a Model Builder model of your area of interest. This model comes with SRTM elevation data. You can load any other raster data that represents terrain. Or you simply load the surfaces from your Civil 3D DWG.
