Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Stock model selection on second setup causes program crash
Stock model selection on second setup causes program crash
Hey fellow Autodesk CAM users! Not sure if this has been posted already so forgive me if it is.
I ran into an issue today where I create a second CAM setup in an Inventor assembly file and when I choose to select a model as the stock, then click the solid body from the tree, the program crashes.
I can reproduce this issue, and we will see if we can figure out how to fix it. Unfortunately I don't have a workaround suggestion at the moment. It's related to the graphics that are being shown for selection, etc., so I think it should be relatively straightforward to fix, once we can figure out what's happening.
No problem. I just worked around it by making a new assembly for the second operation and placing the first operation assembly inside it. Thanks for the quick response!
After some investigation, it turns out that this crash is being triggered by the switch to Modeling view in the Inventor browser after starting the Setup command. Some graphics objects are being deleted out from underneath the addin, resulting in the problem when it tries to access them.
To avoid the problem, you can switch to modeling view before starting the command.
