generic stepcraft uccnc post processor

[AchimN]

We are working on a generic stepcraft uccnc post and we would be happy to get some feedback from you before we put it into the installation.
Feel free to download and test it:

http://cam.autodesk.com/posts/?p=stepcraft_uccnc

Thanks.

[AchimN]

This post is now public.

[Anonymous]

It sets g53 & g54 offsets by default with no option in gui to disable. I presume the gui does not detect g53/g54 as an option. 

[Anonymous]

also with use toolchanger option as no in gui it still posts an m9 and m5. Broke a bit here thanks for that.