Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
We have recently been working on developing a post processor for Laser machines with a Fanuc control. We have finished development and have now released the post as BETA.
If you would be interested in testing this post and providing feedback on it's performance, it can be downloaded from >>HERE<<
The post processor is a CPS file which can be selected inside of the post dialog window. You will not be able to open the .CPS file as a document inside of Fusion / HSM
The post seems to be generating code that does not match the geometry of the part. I have used both in computer and in control to adjust the code with no luck. I also changed the kerf size with no luck. Below is a small peice of code to cut a .250 wide slot and you can see the I.0.1324 when is shout be I0.1250
The post seems to be generating code that does not match the geometry of the part. I have used both in computer and in control to adjust the code with no luck. I also changed the kerf size with no luck. Below is a small peice of code to cut a .250 wide slot and you can see the I.0.1324 when is shout be I0.1250
Just downloaded and we are working on setting up an older Fanuc Laser. We also have some Waterjet machines and the download indicates this may also work with Waterjets.
