POST PROCESSOR FOR SIEMENS 840D sl-840DSL-71
Not applicable
10-04-2019
06:53 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
Good Morning,
Our machine is the DMG DMU-50 ECO . The control is the SIEMENS 840D sl-840DSL-71. The software is the
NC/NCK V04.05.05.03-HMI 04.05.05.04-SOFTWARE VERSION NCU V04.05+SP05+HF03. And we have those three problems:
- the indicator of the axial rotation it's alwes turned on, from the beginning of the machining till the end, eaven if we are not using the axial rotation. this happens only if in the program there are some axial rotations.
- at the end of an operation with the axial rotation turned on and before the next axial rotation, spindle and the rotary table go in the resting position. we would like that only the spindle goes in the resting position. this in order to save time.
- the post pocessor of the thread operation it is not complete. Attached you can see the picture of the machine interface. the Thread1 named, it's how the machine understand the postprocessor of the cam. the thread2 named one it's how it should be. as you can see there are missing and wrong parameters.
Thank you for your help
Bojan
Link copied