Turning 3D sketch (with fit point spline) into body

[Anonymous]

I am working on a design (https://a360.co/3qMgCME) and made a 3D sketch for it:

I am having a hard time turning the sketch into a body. The top and bottom parts are no problem but the nose and curved sides are. I have tried different tools but none of them work. Could someone explain to me how to do this?

[g-andresen]

Hi,

sorry, the link is empty.

Please share the file and a picture of a real existing part it should look like.

File > export > save as f3d on local device  > attach it to the next post.

günther

[TheCADWhisperer]

For a simple design like that - I would not have any 3D sketches - all of my sketches would be 2D.

My sketches would be fully constrained and fully dimensioned, black with no blue curves and no white dots.

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?