Community
Fusion Support
Report issues, bugs, and or unexpected behaviors you’re seeing. Share Fusion (formerly Fusion 360) issues here and get support from the community as well as the Fusion team.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Metal Sheet Flange Error

3 REPLIES 3
Reply
Message 1 of 4
tobias.gramhald
312 Views, 3 Replies

Metal Sheet Flange Error

I made this frame with curved corners in metal sheet in aluminum and i want to make small flanges pointing away from the frame on the sides of it. But it wont allow me to do this. It says "cant complete sheet metal operation due to an internal error. check the body and bend perimeters, then try again". But it dosent work, even with other angles and such.

3 REPLIES 3
Message 2 of 4

Please attach your model.  Open in Fusion 360, pick the File menu, select Export and save to your hard drive.  Attach it to a reply post using the Attachment section.

John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 3 of 4

your part isn't a valid sheet metal body.  it's a continuous ring with no break.  how would you bend it?  fusion doesn't know either, hence the error.

Message 4 of 4
Bunga777
in reply to: laughingcreek

@laughingcreek  

Although what you are saying is true, it is possible to create a flange without being able to create a flat pattern.

 

bunga_0-1668581189383.png

In addition, a flat pattern can be created by cutting with Extrude.

bunga_1-1668581243503.pngbunga_2-1668581258625.png


Therefore, I feel that the intent of the questioner's question is something different.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report