Community
Fusion Support
Report issues, bugs, and or unexpected behaviors you’re seeing. Share Fusion (formerly Fusion 360) issues here and get support from the community as well as the Fusion team.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Chamfer on Corner with Two Components

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
ole.ziessler
91 Views, 3 Replies

Chamfer on Corner with Two Components

Hallo,

I would like to add a Chamfer to a inside Corner where two Components meet. The Chamfer tool however only works on a complete edge. Any tips, tricks, work arounds to realize a corner chamfer as if it was one body. Combining and splitting seems too tedious. See Photos below as an example

 

Corne_With_CHamfer.pngCorner_Without_Chamfer.png

Labels (1)
3 REPLIES 3
Message 2 of 4
jeff_strater
in reply to: ole.ziessler

Fusion does not support "partial Chamfer/Fillet".  You will have to split the body of the component on the right, using the plane of the component as the splitting tool, apply the Chamfer, then Combine the bodies again.  I'll demonstrate with a video soon.


Jeff Strater
Engineering Director
Message 3 of 4
jeff_strater
in reply to: jeff_strater

here are two approaches.  The first is just illustrating the basic idea.  The second ends up with better geometry:

 

 


Jeff Strater
Engineering Director
Message 4 of 4
ole.ziessler
in reply to: ole.ziessler

thanks for the quick reply and assistance. Combining the two bodies, using chamfer and then splitting them again also works. Your version is however some what better due to not having to rename alle components.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums