"Save as" removed from free hobbyist version??
As you can see from the screen capture, the Save As command still exists in the Fusion 360 Personal license. You must have a model open for it to be available.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
@jhackney1972 Does it make any difference if you already have 10 designs set as editable? Do you need 9 or less editable designs for this to work?
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
If you have 10 of 10 editable documents, the Save As command is unavailable. You have to have 9 or less, in a Fusion 360 Personal License, to save a new file by any method to the cloud. The screen capture below is with 10 of 10 editable documents indicated. Export to your local drive is, of course, still available.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
