project drawing dimension issues
Please attach your MODEL to a reply post. Open in Fusion 360. Chose the File menu, then Export and save to your hard drive. You can use the Attachment Section of a reply post.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Fractional dimensions in the Drawing are set using the Document Settings, located at the top of the Drawing Browser, not in the Preferences. Please attach your file for explaniation of other issues.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
You have not attached your model? Did I solve your issue? If so, please select the "Accept Solution" icon to do three things. First it allows others to find a solution to a similar question, two, it closes the Forum post and last, it acknowledges that you accept the solution given. If you need further help, please ask. If you like to read why "Accept Solutions are important, take a look at this webpage.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
