Edge display error?

[alexi_creecy1]

Model displays as having peeling, mesh like, edges with obvious holes along the models perimeter. It seems to be a purely visual display error, as once the file is exported to STL or STEP it's watertight. However I'm not sure if this is poor modelling on my behalf, or a Fusion error.

This model was created with a sculpting mode loft command followed by a number of extrusions and fillets around the edges.

Attached screen shots, one as seen normally, the other in cross-section analysis.

Cant upload the actual file as its for a friends design.

[saito.kh · Accepted solution]

Hi @alexi_creecy1,

Thank you for posting and welcome to the community!

Sorry to hear that!  At this moment I suspect there might be something related to graphics in Fusion with this design.

In order to take a closer look at this, would you mind sharing the design with me?  If it is okay with you and your friends, can you please send a public link to the design - see this web page for how to share a design, and send it to me ([email protected])?

If you have any questions, please let me know!

Thanks.

[alexi_creecy1]

Thanks for your reply.

Strangely the error seemed to sort itself out, once I added a fillet to a few surrounding edges.

[saito.kh]

Hi @alexi_creecy1,

Thank you for the update!

Good to hear it was sorted it out at this time.  I do imagine there might be something related to graphics with the geometry.  If you can share a design you are experiencing this issue, I would appreciate your sharing it for the further investigation of this!

If you have any questions or concerns, please let me know.

Enjoy Fusion!

[saito.kh]

Hi @alexi_creecy1,

Thank you for sharing the design with me!

Sorry to hear this is happening.  I suspect there might be a very tiny object in the space.

I will take a look at this on my end (with my colleagues) and get back with you once I have something to share!  Thank you for your patience.

Thanks.

[jimmy.wick90]

Clear browsing history and cached data
Clearing this cache will sometimes fix page display problems. If you can open Microsoft Edge, select Settings and more > History > Clear browsing data. Select All time under Time range; select Browsing history and Cached images and files, and then select Clear now.

Jimmy