Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

The 2D Pocket strategy generates a mass of unnecessary segments in the lead-in and lead-out paths

1 REPLY 1
Reply
Message 1 of 2
Sadovshikov_Vitalii
80 Views, 1 Reply

The 2D Pocket strategy generates a mass of unnecessary segments in the lead-in and lead-out paths

In the 2D Pocket strategy, I have selected the vertical and horizontal radius for the lead-in and lead-out. However, I am given a bunch of short lines and arcs instead of only two arcs (horizontal and vertical). How can I get rid of this unwanted collection of segments?

Pocket.jpg

 

Screenshot 2023-11-21 at 12.35.03 PM.png

 

 

Tags (1)
1 REPLY 1
Message 2 of 2

In order for a proper G18/19 arc to be created, the move needs to take place along the XZ or YZ plane. If it's somewhere in between, you're only going to get point-to-point moves.


Seth Madore
Customer Advocacy Manager - Manufacturing

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report