Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Tapping

1 REPLY 1
Reply
Message 1 of 2
spano.dom
172 Views, 1 Reply

Tapping

Hi I have this part here and whenever the drill cycle is finished this in a live tool holder, once the tapping operation starts the haas lathe st30-y alarms out stating spindle break is engaged and unable to do the tapping cycle. I tried putting an m115 didn't do nothing and the m155 code in the post doesn't seem to do nothing to disengage the break for the c axis. 

 

The only way to stop I found is to reset the program and start from the tapping cycle. The tapping tool is not in a live tool holder. Is there anyway to make the alarm stop and disengage the break?

1 REPLY 1
Message 2 of 2
seth.madore
in reply to: spano.dom

There will be some G or M code that disengages this mode, do you have a programming sample that lays this out for you?


Seth Madore
Customer Advocacy Manager - Manufacturing

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report