Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Error: Internal error - Shoulder radius cannot be below the radius at the top of the tip (the equator on a non tapered tool)

1 REPLY 1
Reply
Message 1 of 2
FrodoLoggins
165 Views, 1 Reply

Error: Internal error - Shoulder radius cannot be below the radius at the top of the tip (the equator on a non tapered tool)

I keep getting the below errors but I'm not sure what the "shoulder radius" is so I'm assuming full radius keycutters aren't supported with blend/flow toolpaths? 

Screenshot 2023-05-31 at 10.06.57 PM.png

Screenshot 2023-06-01 at 10.21.14 AM.png

FrodoLoggins_0-1685629148420.gif

- Time Magazine’s Person of the Year 2006
- Apple M1 Max rMBP A2485 // Latest MacOS // Latest Fusion
- Usually working off files uploaded to Fusion as: Step, STL, SLDPRT. If it matters ask me.
1 REPLY 1
Message 2 of 2

Hi, I have an interesting solution for you. I created a new setup4 for myself. To briefly mention, I created a new surface and completed the operation with the ramping command. Details are in the data. The method might be a bit boring but I loved it

Ekran görüntüsü 2023-06-16 182826.png

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums