Fusion
I have been looking through Autodesk's library for a post-processor that works with a Doosan 5-axis machine using a Fanuc 31iMB controller. I used the one provided by the library but this is the error I received:
Can anyone help?
The error message means that whatever software you are using.
This software is only capable of supporting the post engine in version 42116.
So, if possible, you can update to a newest release of Inventor if possible.
Or you can eventually download an older revision of the post in the library.
When searching on the online library, you can display the recent changes.
https://cam.autodesk.com/hsmposts
And a list of previous release of the post, with the minimum post engine version needed can be found in the comments.
(See my blue highlight)
Downloading the version shown by the green arrow, should work with your current version of InventorCAM.
To download this version, use the hyperlink at the beginning of the line showing the post version number.
Regards.
______________________________________________________________
If my post answers your question, please click the "Accept Solution" button. This helps everyone find answers more quickly!
