@GeorgeRoberts
Hi George, well a little better in that the checked boxes now have a dark background so it is easier to see them when checked, however that doesn`t do anything for the unchecked stuff, fractionally better but still not good enough IMHO.
Good example, I have set this response to Bold and you will be able to read it much better, a good example is your own first Post, you did one line at the start and one at the end in Bold, reason? to make those lines stand out and make them easier to read, look at the difference between my posts here and your own, honestly, which are the easiest to read ??
Your Designers will no doubt be working in Optimal conditions with good quality hardware with excellent resolutions, the majority of us are working on computers in badly lit workshops/sheds/garages and not the best hardware (Mine is 10 years old, the i7 CPU is 2nd generation!) so please ask them to help out us poor mortals on a tight (strangulated) budget !!! 🙂
As for the NC Program to be brutally honest I don`t see any advantage in having the facility at all, anything that can be done in the NC Program (As it is now) can be done without it !
Just the musings of an old Machinist who has been changing the shape of lumps of metal for more than 55 years 🙂
Not against change at all, I have changed my ways many times over the years to keep up but IMHO this comes under the heading of "Change for change sake", not necessary 😞 😞
Again with respect 🙂