Mazak C600 post-processor (smoothAi)

[paulo2Z36L]

Hi,

I'm about to switch from FeatureCam to Fusion 360 for all my milling/turning at my shop.

I'm looking for some help on finding the right post-processor. Does anyone have one?

The Mazak.cps seems to work but for now...but I'd like to see smaple code from users on Fusion 360 if possible.

Thank you for your help!

[seth.madore]

Sample code from the Mazak post? Click here

[CNC_Lee]

@paulo2Z36L @JHarknessX8ZAF 

 You will need to get a custom post processor written if the generic posts are not providing the required output for your machine. I offer post processor development services and happy to work out a solution for your machine! Message me if still needing assistance. 

[JHarknessX8ZAF]

@paulo2Z36L  Did you end up with a working post for the C600? My company is looking at getting a new C600 by end of year and the post was the last thing I needed to verify to get all our ducks in a row. 

Thank you

[AdamKunzo]

@JHarknessX8ZAF 

If you don't find custom post processor for your machine, you can send me a message and I'll help.

[JHarknessX8ZAF]

@AdamKunzo  Sorry for the delayed response. I believe we have a post that will work, until we get the machine in shop I won't know for sure. If I have a need for a custom post I will definitely reach out. Thanks for the offer.