HAAS UMC 750 new machine model for simulation

[JonasDM46]

Hi,

I have been searching for the new UMC 750 machine model to perform machine simulation but i can't seem to find it.

Can it be added to the Fusion 360 library please ?

Regards,

Jonas

[JonasDM46]

Hi,

I have been searching for the new UMC 750 machine model to perform machine simulation but i can't seem to find it.

Can it be added to the Fusion 360 library please ?

Regards,

Jonas

[seth.madore]

This one?
https://cam.autodesk.com/machineslist?m=haas_umc-750.machine

Yeah, it's not the exact one, since it doesn't have the cover on the top, but I believe the kinematics are the same.

[seth.madore]

This one?
https://cam.autodesk.com/machineslist?m=haas_umc-750.machine

Yeah, it's not the exact one, since it doesn't have the cover on the top, but I believe the kinematics are the same.

[JonasDM46]

That's the old model that is out of production.

I need the new UMC 750 Model with CT spindle for simulation. The new 3D model can be downloaded from HAAS's website but it's quite difficult to set it all up to get a working simulation. If someone would be able to do it, it would be a great help !

The link for the new (REBOOT) 3D model:

https://www.haascnc.com/content/dam/haascnc/pdp_feed/3d/umc-750_classic+reboot+ss+pp+ct+hsk_2021-06....

[JonasDM46]

That's the old model that is out of production.

I need the new UMC 750 Model with CT spindle for simulation. The new 3D model can be downloaded from HAAS's website but it's quite difficult to set it all up to get a working simulation. If someone would be able to do it, it would be a great help !

The link for the new (REBOOT) 3D model:

https://www.haascnc.com/content/dam/haascnc/pdp_feed/3d/umc-750_classic+reboot+ss+pp+ct+hsk_2021-06....

[Steinwerks]

That model is hard to make a simulation model from because Haas modeled it Y-up. This is a great example of why that's a bad idea 😛

[Steinwerks]

That model is hard to make a simulation model from because Haas modeled it Y-up. This is a great example of why that's a bad idea 😛

[boopathi.sivakumar]

Hi @JonasDM46 

Thanks for raising this. I have logged a ticket to update the model.

[boopathi.sivakumar]

Hi @JonasDM46 

Thanks for raising this. I have logged a ticket to update the model.

[JonasDM46 · Accepted solution]

Hi,

I would like to inform you all that the machine has been added to the Fusion 360 machine library.

Download link: https://cam.autodesk.com/machines/download.php?name=haas%20umc-750%20reboot.machine

Regards,

Jonas

[JonasDM46 · Accepted solution]

Hi,

I would like to inform you all that the machine has been added to the Fusion 360 machine library.

Download link: https://cam.autodesk.com/machines/download.php?name=haas%20umc-750%20reboot.machine

Regards,

Jonas