A axis profile on tube

[jpblucasborean]

I'm trying to do a profile on the A axis on the end of a tube. I can't figure out why the tool isn't staying top dead center but moves on both y and z as it is doing the profile. Should the tool not stay at the top of the part and the only movement should be on the A axis rotation and the X? I'm using the "multi axis" feature to try and do this. I have tried using advanced swarf and rotary contour but the result is the same.

Thanks

[seth.madore]

A) What machine and control?

B) Is your WCS Origin set to center of rotation?

C) Does your machine have TCPC/DWO?

Would you be able to share your Fusion file here?
File > Export > Save to local folder, return to thread and attach the .f3d/.f3z file in your reply.

[jpblucasborean]

I get the G255/G254 code in Fusion but my machine an older Haas vf4 goes into alarm if i try to run those in the code.

[jpblucasborean]

[seth.madore]

Would you be able to share your Fusion file here?
File > Export > Save to local folder, return to thread and attach the .f3d/.f3z file in your reply.