3d trace chamfer geometry selection issue

[seth.madore]

Could you share your Fusion file?

File > Export > Save to local folder, return to thread and attach the .f3d file in your reply

[seth.madore]

Could you share your Fusion file?

File > Export > Save to local folder, return to thread and attach the .f3d file in your reply

[SuncoastTechnicalCollege]

I wish screen cast was still around

Titan 10 M op2 trace issue 

[SuncoastTechnicalCollege]

I wish screen cast was still around

Titan 10 M op2 trace issue 

[seth.madore · Accepted solution]

---

@SuncoastTechnicalCollege wrote:

I wish screen cast was still around

---

Same...

Give this a view:

[seth.madore · Accepted solution]

---

@SuncoastTechnicalCollege wrote:

I wish screen cast was still around

---

Same...

Give this a view:

[SuncoastTechnicalCollege]

it wont play - let me try at home computer

[SuncoastTechnicalCollege]

it wont play - let me try at home computer

[SuncoastTechnicalCollege]

I can see videos on my home computer no problem. We must have a school IT issue

thanks for the tips.  I saw the black/blue lines and I couldn't figure out what that was.   In normal contour I could do  open chain and deselect or add as need with the + - under the open contour.  But I can work with that.

Is that covered in the video     
New geometry selections 

[SuncoastTechnicalCollege]

I can see videos on my home computer no problem. We must have a school IT issue

thanks for the tips.  I saw the black/blue lines and I couldn't figure out what that was.   In normal contour I could do  open chain and deselect or add as need with the + - under the open contour.  But I can work with that.

Is that covered in the video     
New geometry selections