post process error in fusion

[jun27670278]

Until now, I've been modeling in Fusion without any issues, and post-processing on the Penta Machine (Pocket NC) has been working fine. However, recently, I've been getting error messages and post-processing is not working.

(Error Message_1, 3, 4)

What could be the problem?

After a recent update, the post-processing settings screen changed, and post-processing no longer works. It works fine on my old Windows 10 installation of Fusion. The machine I'm using is the Penta Machine (Pocket NC V-10).

[a.laasW8M6T · Accepted solution]

Hi

The error messages are fairly self explanatory

Error message_1 is telling you that you must use a machine selected in the setup to post process using that post processor.

Error message_4 is because you need to save the file you are working in before you can select a machine in the setup.

Because you likely didn't have cloud libraries turned on the machine you were using is stored locally on that PC.

You can download a new version on your windows 11 PC or on your windows 10PC turn on Cloud libraries

Then in your machine library move the Pocket NC machine from local to the cloud library.

Now that machine will be available wherever you log into fusion