OKUMA Post Processors

[Anonymous]

I am looking for 2 seperate post processors, I need one for an Okuma GENOS M560-V with A axis rotary, and one for an Okuma Genos L300-MYW with Y axis, live tooling, sub spindle and mill turn. Has anyone used either of these on Fusion before?

[martha.deans]

Hi John,

Unfortunately I'm not familiar with Okuma posts, but I wanted to make sure you knew there is a separate forum specifically for post processors where you might be more likely to find an answer.

Here's the link: http://forums.autodesk.com/t5/post-processors/bd-p/218

Cheers!

[Anonymous]

I am new here, so i thank you very much

[Anonymous]

Hello did you ever find good posts for either of those okuma's? I started using fusion 360 and I really like it except that I've had a hard time finding good Okuma posts for it

[Anonymous]

On the lathe I use mainly the IGF conversational but also add some cad here and there, but on my m560v I did find one I really like, I can forward it to you Monday from work if You like, all I have to do is remove the letter I the program name and remove a null at the last line, then it's good till go, I could probably change that but I look through my code anyways, it's okuma 3and 4 axis .

[Anonymous]

Thanks that would be great, with most of the posts I've found I spend almost as much time editing code as I do programing it on the cad/cam

[steve]

Here is the latest beta post I have found. It is getting very close.

https://cam.autodesk.com/hsmposts?p=okuma_lb3000_mill-turn

[Anonymous]

Thanks Alot I will definitely give this a try

[Anonymous]

Could you send me the post for the m560v? we have one too and i can't get any other post to work in it with the a axis.

[marius_micromet]

Hi

I'm also looking for a post-processor for an Okuma GENOS M560-V with a rotating shaft.
If you find something, please post the processor as well.

I want it too.

Thanks

[Anonymous]

I was wondering if you could email me the geno's m560v post. Thank you.

[KrakenBuilt]

Hi John,

Im desperately looking for a post to the m560v. If its something you wouldn't mind sharing.

[seth.madore]

@KrakenBuilt have you tried the generic Okuma post processor that Autodesk has?
https://cam.autodesk.com/hsmposts?p=okuma

[Anonymous]

Here's a good Post

[Anonymous]

Sorry it didn't attach originally 

[KrakenBuilt]

Thanks Seth, ill tuck this in the back pocket. 🙂

[KrakenBuilt]

Thank you so much Craig. I really truly appreciate this. 🙂 thank you thank you