Modification of Siemens turn-mill post

[lars.olav.tveito]

Hi. I have a lathe with Siemens 810D-control, and c-axis milling-capapilities. When I post a program for milling, I get a line of the spindle number that the control alarms out. 

N980 SPOS[1]=0
N990 G0 SP1=0.

I have gotten the N980 line to appear as it should, but how can I turn off the G0 SP1=0. ? I cant find anywhere in the post where it is creating this code. Any suggestions where to look?

[Boopathi_Sivakumar]

@lars.olav.tveito 

Are you using the generic post processor or the modified one?

if it modified attach the post processor file here.

and Share the model file also

File>export>.F3d

Regards,

Boopathi

[lars.olav.tveito]

Sorry. Here is the file, and the post attached.  

[Boopathi_Sivakumar · Accepted solution]

Find the attached post processor,

I have modified the post processor to get rid of the G0 SP1=0. is this you asked ?

Test the post processor file before you proceed with the machine

Regards,

Boopathi

[lars.olav.tveito]

Yes, this look good. Thank you.