Haas NGC smoothing setting (G187) in post process wrong in latest update

[natthapol.vanasrivilaiXD26K]

Hi,

Post processing script for "haas next generation.cps" version 43442 seem to be wrong.

I don't think Haas NGC can only output smoothing level as G187, G187 P1, G187 P2, G187 P3

Where as P1 is for roughing, P2 for standard, and P3 for finishing.

In post processing script, the smoothing setting has 1 = roughing, 3 = semi/standard, 2 = finishing.

This make the 2D contour and 3D finishing operation become pixelated.

[AchimN]

Hello @natthapol.vanasrivilaiXD26K ,

thanks for your feedback!
This issue has been addressed a few days ago already and is fixed into all Haas postprocessors.

You can find the latest versions of the post here:
https://cam.autodesk.com/hsmposts?p=haas_next_generation