Doosan Mill/Turn post issues

[Jessie.Vaineohurst]

Hello all,

I'm having a heck of a time figuring out how to get this to post properly. I keep getting the following failure log

Machine is a Puma V8300m. I do not have a y axis, so I edited the post to disable y axis. 

I'll attach my post file, as well as the f3d.

Any recommendations on different tool paths or strategies are more than welcome.

Thanks all. 

Information: Configuration: DN Solutions (Doosan) Mill/Turn with Fanuc 0i/31i control

Information: Vendor: DN Solutions (Doosan)

Information: Posting intermediate data to 'D:\Documents\Fusion 360\NC Programs\VTL Test\1001.nc'

Error: Failed to post process. See below for details.

...

Code page changed to '1252  (ANSI - Latin I)'

Start time: Tuesday, June 4, 2024 12:19:07 AM

Code page changed to '20127 (US-ASCII)'

Post processor engine: 5.140.1

Configuration path: C:/Users/Jessie/AppData/Roaming/Autodesk/Fusion 360 CAM/Posts/doosan mill-turn fanuc.cps

Include paths: C:/Users/Jessie/AppData/Roaming/Autodesk/Fusion 360 CAM/Posts

Configuration modification date: Tuesday, June 4, 2024 12:17:21 AM

Output path: D:\Documents\Fusion 360\NC Programs\VTL Test\1001.nc

Checksum of intermediate NC data: a261809cd8e4ba970e3fa26c03de9a78

Checksum of configuration: 9801e51d93d8b07befa9cea450ccc479

Vendor url: https://www.dn-solutions.com

Legal: Copyright (C) 2012-2024 by Autodesk, Inc.

Generated by: Fusion CAM 2.0.19426

...

###############################################################################

Error: Y-axis motion is not possible without a Y-axis for operation "2D Adaptive2".

Error at line: 2637

Error in operation: '2D Adaptive2'

Failed while processing onSection() for record 434.

###############################################################################

Error: Failed to invoke function 'onSection'.

Error: Failed to invoke 'onSection' in the post configuration.

Error: Failed to execute configuration.

Stop time: Tuesday, June 4, 2024 12:19:07 AM

Post processing failed.

[a.laasW8M6T]

Hi

That type of toolpath unfortunately requires a Y axis to machine in that orientation(using a radial tool)

You can mill using and Axial tool and the XZC mode  but you would need a much longer tool.

Do you have the Manufacturing Extension? if so you could use rotary pocket to rough out and Geodesic to finish with a 1/2" ballnose

See attached file

[Jessie.Vaineohurst]

I don’t have the machining extension. 
Is there a path the would allow me to mill the square using an endmill constantly feeding down in Z, moving in and out in X while following the contour in C? 

I haven’t been able to figure out what path to use to do something like that. 

[a.laasW8M6T]

Hi

Yes there is but you would need the Extension to do it

The geodesic path can do it with a ball nose, like what I attached but you would also turn on Spiral

You can do it with Flow, Blend, Steep and shallow too, using a Square or Bullnose(Geodesic only allows Ballnose/lollipop), there's a few tricks to get these to work in 4 axis only

But again you need the extension

[a.laasW8M6T]

Oh and Rotary parallel too, it has a spiral mode, that should have been the first one I mentioned haha

[Jessie.Vaineohurst]

Looks like I’m gonna be talking with the powers that be to get the machining extension. 

thanks!!